Trustpilot 4/5 / Google Reviews 5/5
Amslod display replacement
A display that stays black or throws an error is a nuisance, but the display itself is often not the cause. Below you can read what it usually comes down to, when it is something else, and what you can do about it.
View Amslod displays Find a service point
Talk to a specialist
Not sure which part you need? Call us and our specialists will work it out with you.
500+ service points
A qualified service point near you, anywhere in the Netherlands.
Original Parts
We supply original Amslod parts from stock — no look-alikes that almost fit.
WHY DISPLAYS FAIL
Sound familiar?
In our experience, displays and control pads fail for a handful of recurring reasons. These are the ones we see by far the most.
The bike shed.
By far the most displays and control pads we see are damaged in bike sheds and racks: handlebars knock into each other, and cables or mounts break.
The weather.
The controls and the display have to stand up to wind and rain. Even so, conditions in the Netherlands and Belgium are hard on components like these. Our maritime climate brings damp, and together with sunlight it dries out the rubber buttons until they start letting water through — which is what kills the electronics. We also see connectors oxidise, which makes control pads and displays glitch or stop working altogether.
No signal at all from your display or control pad?
Then it is worth checking whether it is still properly connected. Do be careful: the connectors are fragile, and the small pins in the plug have to seat exactly right. It is always wise to tape up the plug connection with insulating tape.
How long does a display last?
If the bike is kept indoors most of the time, control pads and displays can last 10 years or more.
LOOKS LIKE THE DISPLAY — BUT IS IT?
Or is it something else?
Before you order a new display: a display that does nothing is not necessarily broken itself. These three causes come back regularly.
- The display cable.
The display cable that runs through the frame can be broken. - The controller or the battery.
If the display or the controls show nothing at all, the controller or the battery may be at fault.
Check the battery first.
You can usually check the battery status by pressing the button on the battery itself. It takes a few seconds and can save you a wrong diagnosis.
Is there an error code on screen?
For the technical explanation of each error code, see our knowledge base:
These pages are technical and written mainly for bike mechanics. If you get stuck, give us a call or send us a message.
ORDER IT YOURSELF
The right display or control pad
NEED HELP?
Not sure where to start?
Would you rather have it checked or fitted? Have your bike looked at by a service point near you. Fill in the form and we will match you with one.
SERVICE POINTS
Find an Amslod service point near you
Enter your postcode to see where you can take your Amslod. Every service point works with original parts and knows the Amslod inside out.
Store locator is loading from StoreRocket Store Locator App
Gouden Servicepunt
Voorzien van training, software en onze onderdelen.
Zilveren Servicepunt
Voorzien van software en onze onderdelen.
Servicepunt
Voorzien van onze onderdelen.
Store locator is loading from StoreRocket Store Locator App
Gouden Servicepunt
Voorzien van training, software en onze onderdelen.
Zilveren Servicepunt
Voorzien van software en onze onderdelen.
Servicepunt
Voorzien van onze onderdelen.
Staat er geen servicepunt bij jou in de buurt? Vul dit formulier in, dan zoeken wij naar een monteur voor je.
FREQUENTLY ASKED QUESTIONS
About your Amslod display
In most cases yes, without any trouble — it is usually a few minutes' work. What matters is ordering the right item. We are happy to help if you are unsure. Would you rather have a professional do it? Find a service location near you here!
UV light from the sun vulcanises the rubber. It turns porous and starts letting water through, and that water shorts out the electrical components.
Usually, yes. We supply various displays that can simply be fitted in between.
First check whether the display or the control pad is still properly connected. Do be careful: the connectors are fragile and the small pins in the plug have to seat exactly right. It is always wise to tape up the plug connection with insulating tape.
Yes. The display cable that runs through the frame can be broken. And if the display or the controls show nothing, the controller or the battery may be at fault too. You can usually check the battery status by pressing the button on the battery.
If the bike is kept indoors most of the time, control pads and displays can last 10 years or more.
EXPERIENCES
What our customers say
Knowledge center focused on total service and sharing know-how also of special electric bikes. They offer not only a listening ear but also the willingness to think along in solutions. They certainly do not shy away from difficulties. Where other companies gave up, they found the solution. Great service! Highly recommended.
Yesterday afternoon a technician from Ebikepartners was here to help me with the repair of quite a few Stella bikes. Everything went fantastically well, super service. Customers can be satisfied again.
What a fantastic company Ebikepartners is—founded by Gert. I received a warm welcome there with coffee, and they expertly diagnosed the problems with my Stella Copenhague. I was able to head home happy with a bike that worked perfectly. Kudos to Peter for his kindness and expertise.
A SELECTION FROM OUR RANGE
Brands
Ready to get your Amslod back on the road?
Find a qualified service point near you or fill out the form. You will receive a response within 24 hours, with original parts and expert service.