DESCRIPTION
What is this component?
You can mount it yourself or have it done by your bike mechanic: the unit clicks around the handlebar and is secured with one hex screw. Average job: 3 minutes.
IN SHORT
✔️ 3 buttons: support up, mode, down
✔️ Direct replacement for the more vulnerable, older POD
✔️ Black version, LIN connection (3-pin)
✔️ Assembly: ± 3 minutes, with hex key 2
Compatible with 28" Stella e-bikes with front wheel motor (FDST)
This POD is for Stella e-bikes with a motor in the front wheel (FDST) and the Mobi system, in 28 inches. It is standard on the following models:
Stella Livorno
Storm Grey, Gold, Confetti Gold and Grey LTD · FDST Superior N8D · 28"
Stella Vicenza
Black and Cloud Blue · FDST Superior N8D · 28"
Stella Nantes
Blue/Grey · FDST Superior N7D · 28", also the Nantes Trike
Stella Cosmo
Pearl White · FDST Superior N7D and N8D · 28"
Stella Dolce
Black · FDST Comfort N7D · 28"
Stella Allegra
White en Blue · FDST Easy · 28"
Stella Modena
Night Blue · FDST Comfort N7R · 28"
Stella Avalon
Lead Metal and Grey LTD · FDST Premium N8D · 28"
Stella Vienna
Grey and Champagne · FDST Comfort N3R and N7R · 28"
Stella Fiore
Crème · FDST Comfort N7D · 28"
Stella Forte
Black · FDST Comfort N7D · 28"
Stella Glow
White en Turquoise · FDST Easy 2AP · 28"
Stella Bro
Black · FDST Easy 2AP · 28"
Note: same model name, different system.Several Stella models have also been released under the same name with a mid-motor or a different system, for example, the Livorno and the Vicenza. This POD does not fit those versions. Also, 26" and 20" models are excluded. Therefore, check if your bike has a front wheel motor (FDST) and the Mobi system. Unsure? Send us your frame number, and we will assist you.
Frequently asked questions
Is your question not listed? Call, message, or email us, and we will help you further.
This POD comes standard on many Stella e-bikes with the Mobi system, including the Livorno, Vicenza, Nantes, Copenhagen, Cosmo, Dolce, and Allegra. Check the list above for all models. Are you in doubt? Send us your frame number, and we will check for you.
The frame number is located on the frame, usually at the bottom near the bottom bracket. You can also find it on your purchase receipt or warranty certificate. Send us the number (or a photo of it) via WhatsApp or email, and we will look up which parts are on your bike.
Common signs include buttons that do not respond or only respond after several presses, or buttons that are visibly damaged. If your display is also not working or you see an error message? Then the cause may also be in the cable, the display, or the controller. If in doubt, please contact us.
This black LIN version is specially developed for service. It replaces the older POD that broke down more often, with the same fit and the same function.
Yes. Installation takes about 3 minutes, and all you need is a size 2 Allen wrench. Turn off your e-bike, remove the old POD from the handlebars, disconnect the 3-pin LIN connector, and connect the new POD. Would you rather have someone else do it? A service partner near you will be happy to help.
LIN is the type of connection with which the POD communicates with your e-bike's system. This POD has a 3-pin LIN connector and belongs to the Stella Mobi 2.0 Connect system.
If you order before 5:00 PM, we will ship your order the same day.
Yes, you have a 21-day money-back guarantee. Check our return policy for the conditions.
Yes. Become a service partner and purchase directly at dealer prices, with access to our full B2B product line and personalized technical support. As a service partner, you can search for parts yourself by frame number.